NEWS

With its small and compact construction volume, volume flows of up to 200 l/min can be controlled at a pressure of up to 350 bar. Due to its high resolution, high volume flow and low hysteresis, the valve is perfectly suitable for demanding tasks. The nominal flow at a pressure drop of 10 bar is 90 l/min and can be sensitively controlled with a variable solenoid current by the pilot valve. Using…

The “DSV” electronics have been extended by the option of a 7-pole connector. This connector and its signal assignment correspond to the connection standards used in many places. The electronics are mounted fixed onto a solenoid coil and are used for simple control of a proportional valve. It can be slipped on practically all Wandfluh proportional valves as a slip-on coil.

By its compact…

The new Wandfluh hydraulique valves are direct operated valves in screw-in cartridge construction. These are available in two different sizes and cavities. The smaller models of the MDPPM16 and MGPPM16 series have been designed for a maximum flow of 6 l/min. The cartridge body is provided with a M16x1.5 thread. With the larger models in the MPPPU10 series, a maximum flow of 20 l/min can be…

The proven proportional spool valve with integrated spool position control now has the option of a 7-pole connector that corresponds to the connection standard used in many places. Thus the position signal of the valve spool is available as an analogue feedback value. The valve controls the volume flow proportionally to the preset command value from 0 to 30 l/min finely and precisely. This up to a…